ANR26650M1-B, LithiumWerks Nanophosphate®
Lithium Iron Phosphate (LiFePO4) (formerly A123)
3.3 Volts, 2.5 Ah Cylindrical Battery
NOTE: In March of 2018 LitiumWerks acquired the rights to produce the A123 ANR26650M1-B
The product that will ship is the LithiumWerks ANR26650M1-B cell as pictured above.
For more information about this cell please call us at (800) 650-8810
| 5 - 24
|25 - 99||$ 6.00|
| 100 - 999
|1000 +||$ 5.14|
|Distributor Level Pricing: Call|
For distributor level pricing please call (800) 650-8810 or email us at Sales@StorTronics.com for a quote.
The minimum order for this price group is 5 pieces
Voltage: 3.3 Volts
Capacity: 2.5 Ah
Energy: 8.25 Wh
Specific Power: 2600 W/kg
Impedance (1KHz AC Typical) 6 mΩ
Cycle Life at 1C/1C, 100% DOD: > 4000 cycles
Cell Type: 26650 Lithium Ion Power Cylindrical Cell
Max Continuous Discharage: 50 A
Max Pulse Discharge Current >50% SOC (10s): 120 A
Minimum Voltage: 2 Volts
Temperature: -30ºC to 55ºC
Recommended Standard Charge: 2.5 Amps
Max Charge Rate: 10 Amps
Max Pulse Charge Current <50% SOC (10s): 25 A
Float Voltage: 3.45 Volts
Recommended charge V & Cut-off Current: 3.6 Volts, taper to 125mA
(reduce charging current to 250mA when under 0ºC): 0ºC to 55ºC
Diameter: Ø25.96 +/- 0.5 mm (1.0")
Length: 65.15 +/- 0.5 mm (2.6")
Mass: 76 g
Transportation: UN 3480 (UN38.3), CIQ
Safety: UL 1642, IEC 62133
The LithiumWerks ANR26650M1-B is the next generation of A123 Systems’ pioneering 26650 cylindrical cell, now with greater power and energy density and lower impedance. This versatile lithium ion cell is suitable for a wide variety of applications and system designs. Proven performance in the toughest conditions, combining durability, reliability, and safety, the ANR26650 cell offers an excellent combination of price-performance.
Note: All orders billed to or shipped to Alaska, Hawaii or Internationally, please contact Customer Service.
Cylindrical Cell Primary Applications:
- Portable high power devices
- Stationary battery backup systems
- Grid stabilization energy storage systems
- Commercial truck and bus hybrid electric vehicles (HEVs)
Lithium Ion Cell Benefits:
- Power: Over 2,600 W/kg and 5,800 W/L
- Safety: Excellent abuse tolerance and environmentally friendly
- Life: Excellent calendar life, 10X cycle life vs. conventional lithium ion
Click here for PDF File...
9 Reviews Hide Reviews Show Reviews
Great cells at a great price. I use them to make 2 cell receiver and ignition battery packs. I wouldn’t solder to them because you introduce too much heat to the battery but I spot weld tabs to solder to.
Original. High quality. Reliability. Compatible price. excellent finish. I RECOMMEND ITS USE BECAUSE IT IS SIMPLY THE BEST
Great product. Very fresh and good pricing.
These batteries are super good, durable and reliable. Installed in an RC airplane with complete confidence. Also use them to replace a 12v sealed lead acid battery in our electric start Toro push mower's. WOW!!! what a difference they made cranking the 7 HP engine over.
I have been buying these cells from A123batteries for many years, total quantity in the hundreds of cells. Never once did I ever have a problem with either these cells, or with A123batteries.com. My applications pulls up to 40 Amps out of the cells, with one pack wired as 12 Series, 3 parallel pack with a maximum current of 130 Amperes.
Bought those cells for my Profoto Acute batteries. They use _exactly_ the same cells. Now the batteries work like new.
I've purchased some 200 A123 cells over the years. My West Mountain CBA battery analyzer shows these cells are near identical in performance. And they last many years with little change in performance under 40 Amp loads.
My A123 battery collection now in the hundreds of cells. And, they all consistently meet their performance specs.
Batteries arrived well packaged. Cells voltages were all well matched. Assembled packs and tested all perfect! Couldn't ask for anything better!